Fine Conveyor
- Lineup
- Functions and application examples
- Regarding PSE compliance
Fine Conveyor II Series
FBH 90W
Standard Type
detail
FBG 90W
Meander-less type
detail
FBH 200W (100W)
Powerful standard type
detail
FBG 200W (100W)
Powerful non-snake type
detail
FHH 90W
Head Drive
Standard Type
detail
FHG 90W
Head Drive
Meander-less type
detail
FHH 200W (100W)
Head Drive
Powerful standard type
detail
FHG 200W (100W)
Head drive: Powerful, non-snake type
detail
FPH
Belt removal
Standard Type
detail
FPG
Belt removal
Meander-less type
detail
FBR 90W
Roller edge type
detail
FBR 200W (100W)
Strong roller edge type
detail
FBS 90W
Knife Edge Type
detail
FBS 200W (100W)
Powerful knife edge type
detail
FHV
Trough belt type
detail
FHK
Belt type with horizontal bars
detail
FBN
Upper horizontal type
detail
FBZ
Top and bottom horizontal type
detail
FHB
Loose items
Inclined type
detail
FHW
Loose items
Steep incline type
detail
FHF
2 pulley type
detail
FHQ
Petacon 60
Standard Type
detail
FHQG
Petacon 60
Meander-less type
detail
FES 90W
Accumulator roller type
detail
FES 200W (100W)
Powerful accumulator roller type
detail
FED
Standard roller type
detail
FESW
Wide accumulator roller type
detail
FEDW
Wide standard roller type
detail
FCB
Curved belt type
detail
FNC
Curved belt type
detail
FMC
Curved belt type
detail
FEC
Corner Type
detail
FBY 90W
Junction Type
detail
FBY 200W (100W)
Strong junction type
detail
INDM
High-speed induction conveyor
detail
RT
rotary table
detail
・Our standard belt conveyors (products not subject to the Electrical Appliance and Material Safety Act, those without "-PSE" at the end of the model number) must be used with fixed legs or brackets that are fixed to the wall or floor (sold separately), or directly attached to machinery. Do not use them in any other way (with center legs or caster legs that are not fixed to the floor or wall, etc.), as this may violate the Electrical Appliance and Material Safety Act.
・If you require a product subject to the Electrical Appliance and Material Safety Act (portable products with caster legs that can be moved around, with "-PSE" at the end of the model number), please contact our sales department.
Belt conveyor body and leg combination table
| Belt conveyor body | fixed leg | Caster legs | Center leg |
| PSE target product ("-PSE" is displayed in the model number) |
〇 ※1 | 〇 | 〇 ※1 |
| PSE non-compliant products (Model number does not include "-PSE") |
〇 ※2 | × | 〇 ※2 |
- *1 This only applies when our fixed legs and center legs, which are designed specifically for PSE-compliant products, are combined correctly according to the instructions in the instruction manual, etc. Combining legs other than our fixed legs and center legs, or installing without following the instructions in the instruction manual, etc., may result in the risk of the product falling over, and is therefore extremely dangerous, so please refrain from doing so.
- *2 Use the included fixing brackets for the fixed legs and center legs, and be sure to fix them in place before use.
Electrical Appliance and Material Safety Act
This law was enacted with the aim of preventing dangers and injuries caused by electrical appliances by regulating the manufacture and sale of electrical appliances and promoting the independent activities of private businesses to ensure safety. The regulations apply to electrical appliances that are directly connected to indoor wiring equipment in ordinary homes (receiving electricity directly from an outlet), which requires particularly high levels of safety. (Note: This does not apply to appliances that receive power at voltages above 600V, such as commercial power sources.)