Fine Conveyor IIFHK

Model example

FHK

30

U

R

300

F11

R

09

X

*Colored text is semi-standard.

	Model code		FHK (Head drive cross-bar belt)
	Nominal width		20	25	30	35	40	50	60
BW Actual belt width (mm)			200	250	300	350	400	500	600
FW Frame width (mm)			280	330	380	430	480	580	680
	Captain (cm)	MIN	100						120
		MAX	400
Standard belt *1			Resin belt with cross bars (2-ply)
End Pulley Diameter			φ57
	Drive unit type *2 *3		D: Bottom mounted U: Top mounted (standard) H: Side mounted (hollow shaft)
	Mounting direction of drive unit *2		R: Right side of conveying direction L: Left side of conveying direction
	Speed symbol		Please refer to the "Speed Symbol/Conveyor Speed Table."
	Controller installation direction *2		R：搬送方向右側　L：搬送方向左側　T：コントローラ無し※4
	Motor Output	N: constant speed	09:90W
		D：ブラシレス変速
		F：インバータ変速	09:90W
	Input Power		X: 100V single phase Y: 200V single phase Z: 200V three phase
搬送質量※5			MAX. 50kg/unit

1. The width of the cross bar is the same as the actual BW belt width.
2. Please check here for details.
3. If you select a horizontal (hollow shaft) drive unit, select either fixed speed or inverter variable speed.
   Fixed speed is only available with 200V three-phase input power.
4. T：コントローラ無しは、N：定速の入力電源Z：200V三相のみ適用します。
5. The payload varies depending on the speed. Please refer to "Guideline for payload."

• We also manufacture non-standard specifications such as meander-less types (FHKG), so please contact us for details.

Note) Please see here for the frame cross section.

Note: The graph/table below shows the payload when the load is distributed.

• 1. 色文字 は準標準速度を表します。
  2. 定速とインバータ変速の速度は、負荷により±10%程度変動します。
  3. ブラシレス変速時の負荷による速度変動は±1%以内です。
  4. 中空軸を選択する場合は、定速かインバータ変速を選択してください。定速は入力電源200V三相のみとなります。