Motor Roller Conveyor
*Colored text is semi-standard.
| Roller diameter | Model | type | Roller Material | RW Nominal roller width (mm) | Length (mm)/curve angle | Frame Material | Frame dimensions (mm) (A/B frame) | Speed symbol | Laura Pitch (mm) | power supply | Motor used Laura | Free to use Laura |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| φ42.7 | WPE | Standard | Steel | 305, 390, 490, 620, 690 | 1000, 1500, 2000, 3000 | Steel | A: [90×30×t2.3 B: [90×30×t3.2 |
6, 8, 12, 18, 26, 37 | 75, 100 | 100V single phase 200V three phase |
PSP | PR |
| WPA | Accumulation | Steel | 305, 390, 490, 620, 690 | 1000, 1500, 2000, 3000 | Steel | A: [90×30×t2.3 B: [90×30×t3.2 |
6, 8, 12, 18, 26 | 75, 100 | 200V three phase | PAP | PR | |
| WEN | R900 Tapered roller |
Steel | 305, 390, 490, 620, 690 | 90° | Steel | A: [90×30×t2.3 B: [90×30×t3.2 |
6, 8, 12, 18, 26, 37 | 75, 100 *3 | 100V single phase 200V three phase |
PNP | NTR | |
| WEC | R500 Tapered roller |
Steel | 305, 390, 490, 620 | 90° | Steel | A: [90×30×t2.3 | 6, 8, 12, 18, 26, 37 | 75 ※3 | 100V single phase 200V three phase |
PCP | CTR | |
| φ57 | W.S.W. | Standard | Steel | 305, 390, 490, 620, 690, 790, 890, 990 | 1000, 1500, 2000, 3000 | Steel | A: [90×30×t2.3 B: [90×30×t3.2 |
4, 8, 10, 15, 20, 30, 40 | 75, 100 | 100V single phase 200V three phase |
PSS | SR |
| WSI *1 | Water-resistant | Steel | 305, 390, 490, 620, 690 | 1000, 1500, 2000, 3000 | Steel | A: [90×30×t2.3 B: [90×30×t3.2 |
4, 8, 10, 15, 20, 30, 40 | 75, 100 | 200V three phase | PSS-I | SR | |
| WSJ | waterproof | Made of SUS | 305, 390, 490, 620, 690 | 1000, 1500, 2000, 3000 | Made of SUS | [90 x 30 x t2.3 (SUS304) | 4, 8, 10, 15, 20, 30 | 75, 100 | 200V three phase | PSS-J | SRS | |
| WSA | Accumulation | Steel | 305, 390, 490, 620, 690, 790 | 1000, 1500, 2000, 3000 | Steel | A: [90×30×t2.3 B: [90×30×t3.2 |
4, 8, 10, 15, 20 | 75, 100 | 200V three phase | PAS | SR | |
| WSH | High torque | Steel | 305, 390, 490, 620, 690, 790 | 1000, 1500, 2000, 3000 | Steel | A: [90×30×t2.3 B: [90×30×t3.2 |
4, 8, 10, 15, 20, 30, 40 | 75, 100 | 200V three phase | PHS | SR | |
| WTT | R900 Tapered roller |
Steel | 305, 390, 490, 620, 690, 790 | 90° | Steel | A: [90×30×t2.3 B: [90×30×t3.2 |
4, 8, 10, 15, 20, 30, 40 | 75, 100 *3 |
100V single phase
200V three phase |
PNS | TTR | |
| WSSV *2 | V-pulley linkage | Steel | 305, 390, 490, 620, 690, 790 | 1000, 1500, 2000, 3000 | Steel | A: [90×30×t2.3 B: [90×30×t3.2 |
4, 5, 8, 10, 17, 25, 30, 40 | 75, 100 | 200V three phase | PSS-V | - |
- WSI motor rollers, roller pipes and shafts are made of steel.
- ・The lead wire exit of the WSSV is on the V-pulley side.
- When the roller pitch is 75 mm, the machine length is an integral multiple of the roller pitch (1,050 mm, 1,500 mm, 1,950 mm, 3,000 mm).
・Due to the V-pulley specifications, the effective roller width and dimensions are different. Please refer to the PSS-V model page for details. - The roller pitch for the tapered roller type is equivalent to 75mm and 100mm for R900, and equivalent to 75mm for R500.
