Motor Roller UnitPNP

■ Roller diameter: Inner diameter φ42.7mm
■Thickness: t1.6mm
■ Shaft diameter: φ12mm
■Power supply: AC200V (three-phase), AC100V (single-phase)
■Various specifications

Model and specifications

PNP

-

D

-

390

-

12

-

Z 5

-

NR

*Colored text is semi-standard.

	Model		PNP (φ42.7 R900 tapered roller)
	RW nominal roller width (mm)		305	390	490	620	690
FW frame inner width (mm)			315	400	500	630	700
A dimension (mm)			313	398	498	628	698
Mass (kg/piece)			2.0	2.2	2.8	3.5	4.2
One-touch mounting mechanism			○	○	○	○	○
	Usage environment and specific functions (various specifications)		Blank: Standard, D: Dustproof (IP50)
	Speed symbol		6, 8, 12, 18, 26, 37 *For peripheral speed, refer to the "Characteristics Specifications" table below.
	power supply	Power Source Type	Z5: 200V three-phase x 50/60Hz, X1: 100V single-phase x 50/60Hz *Please use the power supply voltage within ±10% of the reference voltage.
		Voltage x Frequency
	Rubber lining (various specifications)		Blank: Standard (no lining), NR: Natural rubber, UR: Urethane rubber, NB: Nitrile rubber, CR: Neoprene rubber (chloroprene rubber) *The standard thickness of the lining is 3mm.

• 1. Inverter speed change is possible for 620RW or higher and within the frequency range (30 to 90Hz). However, the output torque will be reduced.
  There are other conditions, so please refer to "Restrictions when using an inverter" and "Inverter characteristics."​
  2. Please contact our sales department for any other voltages (however, we cannot handle voltages above 380V).

Characteristics specifications (circumferential speed and tangential force)

*The displayed peripheral speed is at the rated current. The peripheral speed varies depending on the material and mass of the transported object. Please refer to "Transport Speed Fluctuation."​

Characteristics specifications (current and power)