Motor Roller UnitPSP

■ Roller diameter: φ42.7mm
■Thickness: t1.5mm
■ Shaft diameter: φ12mm
■Power supply: AC200V (three-phase), AC100V (single-phase)
■Various specifications

Model and specifications

PSP

-

I

-

390

-

12

-

Z 5

-

NR

*Colored text is semi-standard.

	Model		PSP (φ42.7 standard)
	RW nominal roller width (mm)		300	305	390	400	490	500	600	620	690	700
FW frame inner width (mm)			310	315	400	410	500	510	610	630	700	710
A dimension (mm)			308	313	398	408	498	508	608	628	698	708
Mass *1 (kg/piece)			1.3	1.3	1.4	1.4	1.6	1.6	1.7	1.7	1.9	1.9
One-touch mounting mechanism *2			○	○	○	○	○	○	○	○	○	○
	Usage environment and specific functions (various specifications)		Blank: standard, D: Dustproof (IP50), I: Drip-proof (IP55), J: Waterproof (IP65), B: Brake, DB: Dustproof + Brake, IB: Drip-proof + Brake
	Speed symbol *3		6, 8, 12, 18, 26, 37 *For peripheral speed, refer to the "Characteristics Specifications" table below.
	power supply	Power Source Type	Z5: 200V three-phase x 50/60Hz, X1: 100V single-phase x 50/60Hz *Please use the power supply voltage within ±10% of the reference voltage.
		Voltage x Frequency
	Rubber lining (various specifications)		Blank: Standard (no lining), NR: Natural rubber, UR: Urethane rubber, NB: Nitrile rubber, CR: Neoprene rubber (chloroprene rubber) *The standard thickness of the lining is 3mm.

1. B: The mass of the brake specification is the above mass + 0.2 kg.
2. Some specifications do not have a one-touch mounting mechanism. Please refer to the "Minimum dimensions (various specifications)" in the table below.
3. For I: Drip-proof, J: Waterproof, and IB: Drip-proof + Brake specifications, there are speed limits as torque decreases due to seal resistance. Please refer to the "Speed Limits (Drip-proof and Waterproof)" in the table below.

• 1. Inverter speed change is not possible due to a decrease in conveying torque and unstable operation.
  2. Please contact our sales department for any other voltages (however, we cannot handle voltages above 380V).

Characteristics Specifications

*The displayed peripheral speed is at the rated current. The peripheral speed varies depending on the material and mass of the transported object. Please refer to "Transport Speed Fluctuation."​
*Please refer to the table below for brake power consumption, current and brake torque for B: brake specifications.

• If there is no one-touch mounting mechanism, the shaft will be fixed, so the frame on which the roller is mounted must have a drop-in shaft structure.

• Add the above power consumption (W) and current (A) values to the input power (W) and rated current (A) values in the motor roller's "characteristic specifications" respectively.