Motor Roller UnitPSS-V

■ Roller diameter: φ57mm
■Thickness: t1.5mm
■ Shaft diameter: φ12mm
■Power supply: AC200V (three-phase)
■Various specifications

Model and specifications

PSS-V

-

B

-

390

-

17

-

Z 5

-

NR

*Colored text is semi-standard.

	Model		PSS-V (φ57V with pulley)
	RW nominal roller width (mm)		305	390	490	620	690	790	890	990
FW frame inner width (mm)			315	400	500	630	700	800	900	1,000
A dimension (mm)			313	398	498	628	698	798	898	998
L=A-30 Roller dimensions (mm)			283	368	468	598	668	768	868	968
Mass *1 (kg/piece)			2.3	2.5	2.7	2.9	3.1	3.3	3.5	3.7
One-touch mounting mechanism *2			×	○	○	○	○	○	○	○
	Usage environment and specific functions (various specifications)		Blank: Standard, B: Brake
	Speed symbol		4, 5, 8, 10, 17, 25, 30, 40 *For peripheral speed, refer to the "Characteristics Specifications" table below.
	power supply	Power Source Type	Z5: 200V three-phase x 50/60Hz *Please use the power supply voltage within ±5% of the reference voltage.
		Voltage x Frequency
	Rubber lining (various specifications)		Blank: Standard (no lining), NR: Natural rubber, UR: Urethane rubber, NB: Nitrile rubber, CR: Neoprene rubber (chloroprene rubber) *The standard thickness of the lining is 3mm.

1. B: The mass of the brake specification is the above mass + 0.8 kg.
2. Some models may not have a one-touch mounting mechanism depending on the speed rating and specifications. Please refer to the "Minimum dimensions (various specifications)" in the table below.

• 1. The lead wire exits on the V-pulley side. Also, the roller section is shorter than the nominal RW roller width by the width of the V-pulley.
  2. Inverter speed change is possible within the frequency range (20 to 80Hz). However, the output torque will be reduced.
  There are other conditions, so please refer to "Restrictions when using an inverter" and "Inverter characteristics".
  3. Please contact our sales department for any other voltages (however, we cannot handle voltages above 380V).

Characteristics Specifications

*The displayed peripheral speed is at the rated current. The peripheral speed varies depending on the material and mass of the transported object. Please refer to "Transport Speed Fluctuation."​
*Please refer to the table below for brake power consumption, current and brake torque for B: brake specifications.
*For speeds other than those listed above, please contact our sales department.

• If there is no one-touch mounting mechanism, the shaft will be fixed, so the frame on which the roller is mounted must have a drop-in shaft structure.

• Add the above power consumption (W) and current (A) values to the input power (W) and rated current (A) values in the motor roller's "characteristic specifications" respectively.