Product Information

HOME > Product Information > Conveyor Equipment > Motor Rollers & Conveyors > Motor Roller Unit > Motor Roller Unit / PAP

Motor Roller UnitPAP

Roller diameter φ42.7 Accumulator type

It has a built-in high-impedance, low-current motor and keeps the lock (lock) current at the same level as the load current of the PSP, making it ideal for accumulation lines that remain energized and locked for long periods of time.

Motor Roller Unit / PAP
    Motor Roller Unit / PAP
    Web Catalog

    Product overview

    ■ Roller diameter: φ42.7mm
    ■Thickness: t1.5mm
    ■ Shaft diameter: φ12mm
    ■Power supply: AC200V (three-phase)
    ■Various specifications

    specification

    Model and specifications
    PAP
    		-
    D
    		-
    390
    		-
    12
    		-
    Z 5
    		-
    NR

    *Colored text is semi-standard.

    Model PAP (φ42.7 accumulator)
    RW nominal roller width (mm) 300 305 390 400 490 500 600 620 690 700
    FW frame inner width (mm) 310 315 400 410 500 510 610 630 700 710
    A dimension (mm) 308 313 398 408 498 508 608 628 698 708
    Mass (kg/piece) 1.3 1.3 1.4 1.4 1.6 1.6 1.7 1.7 1.9 1.9
    One-touch mounting mechanism ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
    Usage environment and specific functions
    (various specifications)    		 Blank: Standard, D: Dustproof (IP50)
    Speed symbol 6, 8, 12, 18, 26
    *For peripheral speed, refer to the "Characteristics Specifications" table below.

    		power supply Power Source Type Z5: 200V three-phase x 50/60Hz
    *Please use the power supply voltage within ±10% of the reference voltage.
    Voltage x Frequency
    Rubber lining
    (various specifications)    		 Blank: Standard (no lining),
    NR: Natural rubber, UR: Urethane rubber, NB: Nitrile rubber, CR: Neoprene rubber (chloroprene rubber)
    *The standard thickness of the lining is 3mm.
    • 1. This motor is resistant to burnout even when locked, and can be used for continuous or intermittent operation, with no limit on cycle time.
      However, the starting torque and tangential force are smaller than the standard type.
      2. Inverter speed change is not possible due to a decrease in conveying torque and unstable operation.
      3. Please contact our sales department for any other voltages (however, we cannot handle voltages above 380V).

    Characteristics Specifications


    *The displayed peripheral speed is at the rated current. The peripheral speed varies depending on the material and mass of the transported object. Please refer to "Transport Speed Fluctuation."​

    Dimensions

    Minimum dimensions (various specifications)

    • If there is no one-touch mounting mechanism, the shaft will be fixed, so the frame on which the roller is mounted must have a drop-in shaft structure.
    none