Product Information

HOME > Product Information > Conveyor Equipment > Light Conveyor > Fine Conveyor > Fine Conveyor II / FBN

Fine Conveyor IIFBN

Upper horizontal type

Smooth inclined transport with an inclined section and a horizontal section.

Fine Conveyor II / FBN
About the various icons
Fine Conveyor II / FBN
Web Catalog

specification

Model example
FBNU 30 D R 400 F16 R 20 Z

*Colored text is semi-standard.

Model code FBNU (center drive, uphill) FBND (center drive, downhill)
Nominal width 20 25 30 35 40 50 60
BW Actual belt width (mm) 200 250 300 350 400 500 600
FW Frame width (mm) 280 330 380 430 480 580 680
Captain (upper L1 + slope L2) (cm) 210≦(Upper horizontal captain length L1 + inclined part captain L2)≦600
Standard Belt Resin belt with bars for preventing meandering for steep slopes (2-ply)
End Pulley Diameter φ38
Drive unit type *1 D: Subscript
Mounting direction of drive unit *1 R: Right side of conveying direction L: Left side of conveying direction
Speed symbol Please refer to the "Speed Symbol/Conveyor Speed Table."
Controller installation direction *1 R：搬送方向右側　L：搬送方向左側　T：コントローラ無し※2
Motor Output N: constant speed 20：200Wブレーキ付　10：100Wブレーキ付
注）速度記号N06、F06、P06以下の時は100Wになります。
F：インバータ変速
P：IPM変速※3
入力電源 ※4 Y: 200V single phase Z: 200V three phase
搬送質量※5 MAX. 120kg/unit
  1. Please check here for details.
  2. T：コントローラ無しは、N：定速の入力電源Z：200V三相のみ適用します。
  3. The speed change method is an inverter dedicated to IPM motors.
  4. 200V単相電源にする場合は、F：インバータ変速のみ適用します。
  5. The payload varies depending on the speed. Please refer to "Guideline for payload."
  • We can also manufacture products other than the standard specifications, so please contact us for details.

Power supply compatibility table

Dimensions

注）フレーム断面はこちらをご参照ください。

Estimated payload

Note: The graph/table below shows the payload when the load is distributed.

Speed symbol/Conveyor speed table

  • 1. 色文字 は準標準速度を表します。
    2.「N06」「F06」「P06」以下の場合、モータ出力は100Wになります。（ ■ 部分）
    3. 定速とインバータ変速の速度は、負荷により±10%程度変動します。
none