HOME > Product Information > Conveyor Equipment > Light Conveyor > Fine Conveyor > Fine Conveyor II / FHW
Fine Conveyor IIFHW
Bulk items, steep slope type
For transporting on steep slopes.
About the various icons
specification
 FHW |
 45 |
 U |
 R |
 250 |
 F16 |
 R |
 20 |
 Z |
*Colored text is semi-standard.
|
Model code | FHW (Head drive, bulk, steep incline) | ||||
|---|---|---|---|---|---|---|
|
Nominal width | 35 | 45 | 58 | 65 | |
| BW Actual belt width (mm) | 350 | 450 | 580 | 650 | ||
| Effective belt width (mm) | 160 | 260 | 390 | 460 | ||
| FW Frame width (mm) | 460 | 560 | 690 | 760 | ||
|
Lifting height (cm) | 100-250 (tilt angles 30°, 45°, 60°) | ||||
| Standard Belt | Resin wave bar + horizontal bar + belt with meander prevention bar (2-ply) | |||||
| End Pulley Diameter | φ90 | |||||
|
Drive unit type *1 | U:上付き | ||||
|
Mounting direction of drive unit *1 | R: Right side of conveying direction L: Left side of conveying direction | ||||
|
Speed symbol | Please refer to the "Speed Symbol/Conveyor Speed Table." | ||||
|
Controller installation direction *1 | R：搬送方向右側 L：搬送方向左側 T：コントローラ無し※2 | ||||
|
Motor Output | N: constant speed | 20：200Wブレーキ付 10：100Wブレーキ付 注）速度記号N06、F06、P06以下の時は100Wになります。 |
|||
| F：インバータ変速 | ||||||
| P：IPM変速※3 | ||||||
|
入力電源 ※4 | Y: 200V single phase Z: 200V three phase | ||||
| Transport mass | Please refer to the "Conveying capacity guideline." | |||||
- Please check here for details.
- T：コントローラ無しは、N：定速の入力電源Z：200V三相のみ適用します。
- The speed change method is an inverter dedicated to IPM motors.
- 200V単相電源にする場合は、F：インバータ変速のみ適用します。
- We can also manufacture products other than the standard specifications, so please contact us for details.
Power supply compatibility table
Dimensions
Note) Please see here for the frame cross section.
Estimated payload
Speed symbol/Conveyor speed table
- 1. 色文字 は準標準速度を表します。
2.「N06」「F06」「P06」以下の場合、モータ出力は100Wになります。（ ■ 部分）
3. 定速とインバータ変速の速度は、負荷により±10%程度変動します。