Fine Conveyor IIFPH

Model example

FPH

30

D

R

150

D13

R

09

X

*Colored text is semi-standard.

	Model code		FPH (Center drive, removable belt, standard)
	Nominal width		20	25	30	35	40	50	60
BW Actual belt width *1 (mm)			197	247	297	347	397	497	597
FW Frame width (mm)			280	330	380	430	480	580	680
	Captain (cm)	MIN	100						120
		MAX	800 *High speed specification is 400
Machine height (mm)			660≦Machine height H≦1,060
Standard Belt			Resin flat belt (1 ply)
End Pulley Diameter			φ34
	Drive unit type *2		D: Subscript (parallel axis)
	Mounting direction of drive unit *2		R: Right side of conveying direction L: Left side of conveying direction
	速度記号		Please refer to the "Speed Symbol/Conveyor Speed Table."
	Controller installation direction *2		R：搬送方向右側　L：搬送方向左側　T：コントローラ無し※3
	Motor Output	N: constant speed	09:90W
		D：ブラシレス変速
		F：インバータ変速	09:90W
	Input Power		X: 100V single phase Y: 200V single phase Z: 200V three phase
搬送質量※4			MAX. 50kg/unit

1. If the length of the device exceeds 400 cm, the actual belt width will be 7 mm narrower.
2. Please check here for details.
3. T：コントローラ無しは、N：定速の入力電源Z：200V三相のみ適用します。
4. The payload varies depending on the speed. Please refer to "Guideline for payload."

• We can also manufacture products other than the standard specifications, so please contact us for details.

Note) Please see here for the frame cross section.

Note: The graph/table below shows the transport mass when the load is distributed horizontally.

• 1. 色文字 は準標準速度を表します。
  2. 定速とインバータ変速の速度は、負荷により±10%程度変動します。
  3. ブラシレス変速時の負荷による速度変動は±1%以内です。