Product Information

HOME > Product Information > Conveyor Equipment > Light Conveyor > Fine Conveyor > Fine Conveyor II / FBS 90W

Fine Conveyor IIFBS 90W

Knife Edge Type

Small items can be transferred smoothly, with a maximum carrying capacity of 15 kg per unit

Fine Conveyor II / FBS 90W
About the various icons
Fine Conveyor II / FBS 90W
Web Catalog

specification

Model example
FBSB 40 D R 200  D11 R 09 X

*Colored text is semi-standard.

Model code FBSB (Center drive double knife edge)
FBSU (upstream only) FBSD (downstream only)
Nominal width 20 25 30 35 40 50 60
BW Actual belt width (mm) 190 240 290 340 390 490 590
FW Frame width (mm) 280 330 380 430 480 580 680
Captain (cm) MIN 60 70 80 100 120
MAX 400
Standard Belt Resin flat belt (1 ply)
Edge Radius R3
End pulley diameter *1 φ34
Drive unit type *2 D: Subscript
Mounting direction of drive unit *2 R: Right side of conveying direction L: Left side of conveying direction
速度記号 Please refer to the "Speed Symbol/Conveyor Speed Table."
Controller installation direction *2 R：搬送方向右側　L：搬送方向左側　T：コントローラ無し※3
Motor Output N: constant speed 09:90W
D：ブラシレス変速
F：インバータ変速 09:90W
Input Power X: 100V single phase Y: 200V single phase Z: 200V three phase
搬送質量※4 Double knife edge: MAX. 15 kg/unit Single knife edge: MAX. 25 kg/unit
  1. Non-knife edge side of one-sided knife edge specification
  2. Please check here for details.
  3. T：コントローラ無しは、N：定速の入力電源Z：200V三相のみ適用します。
  4. The payload varies depending on the speed. Please refer to "Guideline for payload."
  • We can also manufacture products other than the standard specifications, so please contact us for details.

Dimensions

Note) Please see here for the frame cross section.

Estimated payload

Note: The graph/table below shows the transport mass when the load is distributed horizontally.

Speed symbol/Conveyor speed table

  • 1. 色文字 は準標準速度を表します。
    2. 定速とインバータ変速の速度は、負荷により±10%程度変動します。
    3. ブラシレス変速時の負荷による速度変動は ±1%以内です。
    4. 速度記号「N22」「D18」「F22」以下の場合、搬送能力は低下します。（ ■部分）
none