HOME > Product Information > Conveyor Equipment > Light Conveyor > Fine Conveyor > Fine Conveyor II / FBZ
Fine Conveyor IIFBZ
Top and bottom horizontal type
Smooth inclined transport with a horizontal section + inclined section + horizontal section.
About the various icons
specification
 FBZU |
 30 |
 D |
 R |
 500 |
 F16 |
 R |
 20 |
 Z |
 80 |
*Colored text is semi-standard.
|
Model code | FBZU (center drive, uphill) FBZD (center drive, downhill) | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
Nominal width | 20 | 25 | 30 | 35 | 40 | 50 | 60 | ||
| BW Actual belt width (mm) | 200 | 250 | 300 | 350 | 400 | 500 | 600 | |||
| FW Frame width (mm) | 280 | 330 | 380 | 430 | 480 | 580 | 680 | |||
|
Captain (Upper L1 + Inclined part L2) (cm) |
Upbound 1 | 210≦(Upper horizontal captain length L1 + inclined part captain L2)≦600> |
|||||||
| Upbound 2 | 210≦(Upper horizontal captain length L1 + inclined part captain L2)≦600 |
|||||||||
| Downstream | 210≦(Upper horizontal captain length L1 + inclined part captain L2)≦600 |
|||||||||
| Standard Belt | Inclined section: Resin belt with bars for preventing meandering for steep inclines (2-ply) Lower horizontal section: Resin belt with anti-snake bars (2-ply) |
|||||||||
| End Pulley Diameter | φ38 | |||||||||
|
Drive unit type *1 | D: Subscript | ||||||||
|
Mounting direction of drive unit *1 | R: Right side of conveying direction L: Left side of conveying direction | ||||||||
|
速度記号 | Please refer to the "Speed Symbol/Conveyor Speed Table." | ||||||||
|
Controller installation direction *1 | R：搬送方向右側 L：搬送方向左側 T：コントローラ無し※2 | ||||||||
|
Motor Output | N: constant speed | 20：200Wブレーキ付 10：100Wブレーキ付 注）速度記号N06、F06、P06以下の時は100Wになります。 |
|||||||
| F：インバータ変速 | ||||||||||
| P：IPM変速※3 | ||||||||||
|
入力電源 ※4 | Y: 200V single phase Z: 200V three phase | ||||||||
|
Lower horizontal pilot length L3 (cm) | 60≦Lower horizontal captain L3≦100 | ||||||||
| 搬送質量※5 | MAX. 120kg/unit | |||||||||
- Please check here for details.
- T：コントローラ無しは、N：定速の入力電源Z：200V三相のみ適用します。
- The speed change method is an inverter dedicated to IPM motors.
- 200V単相電源にする場合は、F：インバータ変速のみ適用します。
- The payload varies depending on the speed. Please refer to "Guideline for payload."
- We can also manufacture products other than the standard specifications, so please contact us for details.
Power supply compatibility table
Dimensions
注）フレーム断面はこちらをご参照ください。
Estimated payload
Note: The graph/table below shows the payload when the load is distributed.
Speed symbol/Conveyor speed table
- 1. 色文字 は準標準速度を表します。
2.「N06」「F06」「P06」以下の場合、モータ出力は100Wになります。（ ■ 部分）
3. 定速とインバータ変速の速度は、負荷により±10%程度変動します。