Fine Conveyor IIFED

Model example

FED

30

D

R

300

D18

R

09

X

*Colored text is semi-standard.

	Model code		FED (Center Drive Standard Roller)
	Nominal width		20	25	30	35	40	50
RW Actual belt width (mm)			202	252	302	352	402	502
FW Frame width (mm)			280	330	380	430	480	580
	Captain (cm)	MIN	80
		MAX	400
Carrier Roller Diameter			φ18
Roller pitch (mm)			20
	Drive unit type *1		D: Subscript
	Mounting direction of drive unit *2 (belt running direction)		R: Right side of conveying direction L: Left side of conveying direction
	速度記号		Please refer to the "Speed Symbol/Conveyor Speed Table."
	Controller installation direction *2		R：搬送方向右側　L：搬送方向左側　T：コントローラ無し※3
	Motor Output	N: constant speed	09:90W
		D：ブラシレス変速
		F：インバータ変速	09:90W
	Input Power		X: 100V single phase Y: 200V single phase Z: 200V three phase
Transport mass			Please refer to "Guideline for payload."

1. Please check here for details
2. Please refer to "Drive unit installation direction (belt running direction)/controller installation direction."
3. T：コントローラ無しは、N：定速の入力電源Z：200V三相のみ適用します。

• We can also manufacture products other than the standard specifications, so please contact us for details.

Note) For frame cross section and motor protrusion dimensions (dimension A in the diagram above), please refer here.

Note: The above table shows the transport mass when the load is distributed horizontally.

• 1. 色文字 は準標準速度を表します。
  2. 定速とインバータ変速の速度は、負荷により±10%程度変動します。
  3. ブラシレス変速時の負荷による速度変動率は-2%以内です。