Fine Conveyor IIFNC

Model example

FNC 30 D R 90 F29 L 20 Z

-

Machine height (mm) 700H

	Model code		FNC (Center Drive Curve)
	Nominal width		30	40	50	60	80
BW Effective belt width (mm)			300	400	500	600	800
Inner radius (mm)			200
	Curve Angle		90：90°
Standard Belt			Resin curved belt (1 ply)
End Roller Diameter			φ14
	Drive unit type *1		D: Subscript
	Conveying direction *2		R: Right (clockwise)L: Left (counterclockwise)
	Speed symbol		Please refer to the "Speed Symbol/Conveyor Speed Table."
	Controller installation direction *2		R: Right side when viewed from the outside/ L: Left side when viewed from the outside
	Motor Output	F: Inverter speed change	20: 200W 40: 400W
	Input Power		Z: 200V three-phase
Transport mass			Maximum speed change: 10kg/unit

1. Please check here for details
2. For details, please refer to "Transport direction and controller position."

• We can also manufacture products other than the standard specifications, so please contact us for details.

The speeds listed below are the belt center speeds.

• 1. 速度は、負荷により±10%程度変動します。
  2. ベルト幅により速度は変動します。

*Depending on the width and height of the machine, it may not be possible to install it in the specified location.