HOME > Product Information > Conveyor Equipment > Light Conveyor > Fine Conveyor > Fine Conveyor II / FHH 90W
Fine Conveyor IIFHH 90W
Head drive standard type
Head drive type that is easy to maintain.
About the various icons
specification
 FHH |
 30 |
 D |
 R |
 300 |
 D18 |
 R |
 09 |
 X |
*Colored text is semi-standard.
|
Model code | FHH (Head Drive Standard) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|
Nominal width *1 | 20 | 25 | 30 | 35 | 40 | 50 | 60 | 70 | 80 | |
| BW Actual belt width (mm) | 200 | 250 | 300 | 350 | 400 | 500 | 600 | 700 | 800 | ||
| FW Frame width (mm) | 280 | 330 | 380 | 430 | 480 | 580 | 680 | 780 | 880 | ||
|
Captain (cm) | MIN | 70 | 80 | 100 | 120 | 140 | 160 | |||
| MAX | 800 *High speed specification is 400 | 400 | |||||||||
| Standard Belt | Resin flat belt (1 ply) | Same as left (2-ply) | |||||||||
| End Pulley Diameter | φ34 | φ57 | |||||||||
|
Drive unit type *2 *3 | D: Downward (standard) U: Upper-mounted H: Side-mounted (hollow shaft) | |||||||||
|
Mounting direction of drive unit *2 | R: Right side of conveying direction L: Left side of conveying direction | |||||||||
|
速度記号 | Please refer to the "Speed Symbol/Conveyor Speed Table." | |||||||||
|
Controller installation direction *2 | R：搬送方向右側 L：搬送方向左側 T：コントローラ無し※4 | |||||||||
|
Motor Output | N: constant speed | 09:90W | ||||||||
| D：ブラシレス変速 | |||||||||||
| F：インバータ変速 | 09:90W | ||||||||||
|
Input Power | X: 100V single phase Y: 200V single phase Z: 200V three phase | |||||||||
| 搬送質量※5 | MAX. 50kg/unit | ||||||||||
- The applicable nominal width for high-speed specifications is 20 to 60.
- Please check here for details
- If you select a horizontal (hollow shaft) drive unit, select either fixed speed or inverter variable speed.
Fixed speed is only available with 200V three-phase input power. - T：コントローラ無しは、N：定速の入力電源Z：200V三相のみ適用します。
- The payload varies depending on the speed. Please refer to "Guideline for payload."
- We can also manufacture products other than the standard specifications, so please contact us for details.
Dimensions
Note) Please see here for the frame cross section.
Estimated payload
Note: The graph/table below shows the transport mass when the load is distributed horizontally. 
Speed symbol/Conveyor speed table
- 1. 色文字 は準標準速度を表します。
2. 定速とインバータ変速の速度は、負荷により±10%程度変動します。
3. ブラシレス変速時の負荷による速度変動は±1%以内です。
4. 中空軸を選択する場合は、定速かインバータ変速を選択してください。定速は入力電源200V三相のみとなります。