Motor Roller UnitPSQ

■ Roller diameter: φ38mm
■Thickness: t1.2mm
Shaft diameter: φ12mm
■Power supply: AC200V (three-phase), AC100V (single-phase)
■Various specifications

Model and specifications

PSQ

-

I

-

390

-

8

-

Z 5

-

NR

*Colored text is semi-standard.

	Model		PSQ (φ38 standard)
	RW nominal roller width (mm)		240	300	305	390	400	490	500	600
FW frame inner width (mm)			250	310	315	400	410	500	510	610
A dimension (mm)			248	308	313	398	408	498	508	608
Mass *1 (kg/piece)			1.0	1.1	1.1	1.2	1.2	1.3	1.3	1.4
One-touch mounting mechanism *2			○	○	○	○	○	○	○	○
	Usage environment and specific functions (various specifications)		Blank: standard, I: Waterproof (IP55), J: Waterproof (IP65), B: Brake, IB: Waterproof + Brake
	Speed symbol *3		5, 8, 10, 15, 20, 30 *For peripheral speed, refer to the "Characteristics Specifications" table below.
	power supply	Power Source Type	Z5: 200V three-phase x 50/60Hz, X1: 100V single-phase x 50/60Hz *Please use the power supply voltage within ±10% of the reference voltage.
		Voltage x Frequency
	Rubber lining (various specifications)		Blank: Standard (no lining), NR: Natural rubber, UR: Urethane rubber, NB: Nitrile rubber, CR: Neoprene rubber (chloroprene rubber) *The standard thickness of the lining is 3mm.

1. B: The mass of the brake specification is the above mass + 0.2 kg.
2. Some specifications do not have a one-touch mounting mechanism. Please refer to the "Minimum dimensions (various specifications)" in the table below.
3. For I: Drip-proof, J: Waterproof, and IB: Drip-proof + Brake specifications, there are speed limits as torque decreases due to seal resistance. Please refer to the "Speed Limits (Drip-proof and Waterproof)" in the table below.

• 1. Inverter speed change is not possible due to a decrease in conveying torque and unstable operation.
  2. Please contact our sales department for any other voltages (however, we cannot handle voltages above 380V).

Characteristics Specifications

*The displayed peripheral speed is at the rated current. The peripheral speed varies depending on the material and mass of the transported object. Please refer to "Transport Speed Fluctuation."​
*Please refer to the table below for brake power consumption, current and brake torque for B: brake specifications.

• If there is no one-touch mounting mechanism, the shaft will be fixed, so the frame on which the roller is mounted must have a drop-in shaft structure.

• Add the above power consumption (W) and current (A) values to the input power (W) and rated current (A) values in the motor roller's "characteristic specifications" respectively.