Motor Roller UnitPSL
Roller diameter φ48.6 Standard type
This is a general-purpose motor roller that is compatible with the LR type free roller, with the same diameter (φ48.6). A wide range of specifications are available, including roller width and speed, to accommodate a variety of operating conditions, including continuous and intermittent operation.
Product overview
■ Roller diameter: φ48.6mm
■Wall thickness: t1.4mm
Shaft diameter: φ12mm
■Power supply: AC200V (three-phase), AC100V (single-phase)
■Various specifications
specification
|
- |
|
- |
|
- |
|
- |
|
- |
|
*Colored text is semi-standard.
 |
Model | PSL (φ48.6 standard) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
RW nominal roller width (mm) | 240 | 300 | 305 | 390 | 400 | 490 | 500 | 600 | 620 | 690 | 700 | |
| FW frame inner width (mm) | 250 | 310 | 315 | 400 | 410 | 500 | 510 | 610 | 630 | 700 | 710 | ||
| A dimension (mm) | 248 | 308 | 313 | 398 | 408 | 498 | 508 | 608 | 628 | 698 | 708 | ||
| Mass *1 (kg/piece) | 1.8 | 1.9 | 1.9 | 2 | 2 | 2.2 | 2.2 | 2.3 | 2.3 | 2.4 | 2.4 | ||
| One-touch mounting mechanism *2 | × | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ||
 |
Usage environment and specific functions (various specifications) |
Blank: standard, I: Waterproof (IP55), J: Waterproof (IP65), B: Brake, IB: Waterproof + Brake |
|||||||||||
 |
Speed symbol *3 | 5, 10, 15, 20, 30, 40 *For peripheral speed, refer to the "Characteristics Specifications" table below. |
|||||||||||
  |
power supply | Power Source Type | Z5: 200V three-phase x 50/60Hz, X1: 100V single-phase x 50/60Hz *Please use the power supply voltage within ±10% of the reference voltage. |
||||||||||
| Voltage x Frequency | |||||||||||||
 |
Rubber lining (various specifications) |
Blank: Standard (no lining), NR: Natural rubber, UR: Urethane rubber, NB: Nitrile rubber, CR: Neoprene rubber (chloroprene rubber) *The standard thickness of the lining is 3mm. |
|||||||||||
- B: The mass of the brake specification is the above mass + 0.3 kg.
- Some specifications do not have a one-touch mounting mechanism. Please refer to the "Minimum dimensions (various specifications)" in the table below.
- For I: Drip-proof, J: Waterproof, and IB: Drip-proof + Brake specifications, there are speed limits as torque decreases due to seal resistance. Please refer to the "Speed Limits (Drip-proof and Waterproof)" in the table below.
- 1. Inverter speed change is possible within the frequency range (30 to 90Hz) for speed symbols 5, 10, and 15, and within the frequency range (30 to 70Hz) for speed symbols 20, 30, and 40. However, the output torque will be reduced.
There are other conditions, so please refer to "Restrictions when using an inverter" and "Inverter characteristics."
2. Please contact our sales department for any other voltages (however, we cannot handle voltages above 380V).
Characteristics Specifications
*The displayed peripheral speed is at the rated current. The peripheral speed varies depending on the material and mass of the transported object. Please refer to "Transport Speed Fluctuation."
*Please refer to the table below for brake power consumption, current and brake torque for B: brake specifications.
Dimensions
Minimum dimensions (various specifications)
- If there is no one-touch mounting mechanism, the shaft will be fixed, so the frame on which the roller is mounted must have a drop-in shaft structure.
Brake power consumption, current, and brake torque (brake specifications)
- Add the above power consumption (W) and current (A) values to the input power (W) and rated current (A) values in the motor roller's "characteristic specifications" respectively.
Speed limit (waterproof/splashproof)
