HOME > Product Information > Conveyor Equipment > Light Conveyor > Plastic Belt Conveyor > Plastic Belt Conveyor / JQN
Plastic Belt ConveyorJQN
Wheel edge type (for light loads)
This conveyor has R25.7mm on both ends to allow small items to move smoothly.
About the various icons
specification
 JQNH |
 40 |
 H |
 R |
 600 |
 F20 |
 R |
 20 |
 Z |
*Colored text is semi-standard.
|
Model code | JQNH (head drive) JQNC (center drive) | |||||
|---|---|---|---|---|---|---|---|
|
Nominal width | 20 | 30 | 40 | 50 | 60 | |
| BW Actual belt width (mm) | 203 | 305 | 406 | 508 | 610 | ||
| FW Frame width (mm) | 260 | 360 | 460 | 560 | 660 | ||
|
Captain (cm) | MIN.142.5~600 (JQNH) MIN.90~600 (JQNC) | |||||
|
Drive Type | H: Horizontal (hollow shaft) | |||||
|
Mounting direction of drive unit | R: Right side of conveying direction L: Left side of conveying direction | |||||
|
Speed symbol | Please refer to the "Conveyor Speed Table" |
|||||
|
Controller installation direction | R: Right side of conveying direction L: Left side of conveying direction | |||||
|
Motor Output | N: constant speed | 09: 90W 20: 200W *The motor is IP65 waterproof. | ||||
| F: Inverter speed change | |||||||
|
Input Power | X: 100V single phase Y: 200V single phase Z: 200V three phase *Only compatible with motors with variable speed 90W specifications. |
|||||
| Standard Belt | #1100 Flash Grid | ||||||
| Transfer mass *1 | Max. 15 kg/㎡ | ||||||
- The conveyed mass will vary depending on various conditions such as belt width, machine length, and amount of material being conveyed.
- We can also produce products other than the standard specifications, so please contact us for details.
Dimensions
Standard specification power supply compatibility table
Conveyor Speed Table
Note: The speed may vary by approximately ±10% depending on the load.