Plastic Belt ConveyorJQJ

Model example

JQJ

140

D

R

60

16

L

20

Z

	Model code		JQJ (Head drive, wide, short-term, long-term, double-sided knife edge)
	Nominal width		20	30	40	50	60	70	80	90	100	110	120	130	140
BW Actual belt width (mm)			203	305	406	508	610	711	813	914	1,016	1,118	1,219	1,321	1,422
FW Frame width (mm)			280	380	480	580	680	780	880	980	1,080	1,180	1,280	1,380	1,480
	Captain (cm)		MIN.20～MAX.100
Knife edge diameter (mm)			R3 (belt outer diameter R9)
	Drive Type		D: Subscript (parallel axis)
	Mounting direction of drive unit		R: Right side of conveying direction L: Left side of conveying direction
	Speed symbol		Please refer to the "Conveyor Speed Table"
	Controller installation direction *1		R: Right side of conveying direction L: Left side of conveying direction
	Motor Output		09: 90W 20: 200W (F: Inverter speed change only. "F" indicates Mitsubishi manufactured.) *The motor is IP65 waterproof.
	Input Power		X: 100V single phase Y: 200V single phase Z: 200V three phase
Standard Belt			Flat Top
Payload *2			Motor output 90W: Max. 8kg/unit Motor output 200W: Max. 15kg/unit

1. If the length of the machine is less than 65 cm, it will be installed on the opposite side to the drive unit.
2. The conveyed mass will vary depending on various conditions such as belt width, machine length, and amount of material being conveyed.

• We can also produce products other than the standard specifications, so please contact us for details.

Standard specification power supply compatibility table

• 1. The speed will fluctuate by approximately ±10% depending on the load.
  2. "F" indicates that it is made by Mitsubishi.