HOME > Product Information > Conveyor Equipment > Light Conveyor > Plastic Belt Conveyor > Plastic Belt Conveyor / JPL
JPLPlastic Belt Conveyor
Straight type (for medium loads)
A medium-load straight conveyor that allows you to select from a variety of belts depending on the application.
About the various icons
specification
 JPL |
 40 |
 H |
 R |
 900 |
 F32 |
 R |
 20 |
 Z |
|
Model code | JPL (Head Drive Straight) | |||||
|---|---|---|---|---|---|---|---|
|
Nominal width | 20 | 30 | 40 | 50 | 60 | |
| BW Actual belt width (mm) | 203 | 304 | 406 | 499 | 600 | ||
| FW Frame width (mm) | 275 | 375 | 475 | 575 | 675 | ||
|
Captain (cm) | MIN.90〜MAX.900 | |||||
|
Drive Type | H: Horizontal (hollow shaft) | |||||
|
Mounting direction of drive unit | R: Right side of conveying direction L: Left side of conveying direction | |||||
|
Speed symbol | Please refer to the "Conveyor Speed Table" |
|||||
|
Controller installation direction | R: Right side of conveying direction L: Left side of conveying direction | |||||
|
Motor Output | N: constant speed | 10: 100W 20: 200W 40: 400W *The motor is IP65 waterproof. | ||||
| F: Inverter speed change | |||||||
|
Input Power | Z: Three phase 200V | |||||
| Standard Belt | #900 Flash Grid | ||||||
| Transfer mass *1 | MAX.25kg/㎡ | ||||||
- The conveyed mass will vary depending on various conditions such as belt width, machine length, and amount of material being conveyed.
- We can also produce products other than the standard specifications, so please contact us for details.
Dimensions
Motor output standard setting list
Conveyor Speed Table
Note: The speed may vary by approximately ±10% depending on the load.