Magnetic Drive ConveyorMFVD

Centering type (stainless steel roller)

Aluminum frame centering conveyor that moves transported items to the center

About the various icons

Web Catalog

specification

Model example
MFVD	20	D	B	204.2	D15	R	09	X

*Colored text is semi-standard.

	Model code		MFVD (centering type stainless steel roller)
	Nominal width		20	30
RW Actual roller width (mm) ^*1			204 (102RW x 2)	304 (152RW x 2)
FW Frame width (mm)			380	480
	L Captain (cm)		104.2	144.2
Carrier Roller Diameter			φ18
Roller pitch (mm)			20
Roller Material			stainless
	Drive Type		D: Subscript
	Drive shaft direction ^*2		B: Both sides
	Speed symbol		Please refer to the "Speed Symbol/Conveyor Speed Table"
	Controller installation direction ^*2		R: Right side L: Left side
	Motor Output	N: constant speed	02:25W 04:40W 06:60W 09:90W
		D：ブラシレス変速	05:50W 09:90W
		F：インバータ変速	02:25W 04:40W 06:60W 09:90W
Number of motors			2 units
	Input Power		X: 100V single phase Y: 200V single phase Z: 200V three phase

Do not use the unit when it is out of step.
Do not use in dusty environments or in environments where water, oil, etc. may be present.
Overhanging transport is not possible.
If you are using a pacemaker or other medical device, please do not go near the magnet as it may affect your health.

Note) Please see here for the frame cross section.

Note: The above capacity varies depending on the type of transported item and the condition of the bottom surface.

1. 色文字は準標準速度を表します。
2. 定速とインバータ変速の速度は、負荷により±10%程度変動します。
3. ブラシレス変速時の負荷による速度変動は±1%以内です。