JabconJME
Detachable upper pull belt type (for light loads)
The round pipe frame is dirt-resistant and the belt is extremely easy to attach and remove.

About the various icons

specification
JME |
30 |
D |
R |
300 |
F18 |
R |
09 |
X |
*Colored text is semi-standard.
![]() |
Model code | JME (Head Drive Upper Pull Belt Removal) | ||||
|---|---|---|---|---|---|---|
![]() |
Nominal width | 20 | 30 | 40 | 50 | |
| BW Actual belt width (mm) | 200 | 300 | 400 | 500 | ||
| FW Frame width (mm) | 301 | 401 | 501 | 601 | ||
![]() |
Captain (cm) | MIN.100〜MAX.400 | ||||
| Standard Belt | Resin belt with anti-snake bars (1 ply) | |||||
| End Pulley Diameter | φ42 | |||||
![]() |
Drive unit type *1 | D:下付き | ||||
![]() |
Mounting direction of drive unit *1 | R: Right side of conveying direction | ||||
![]() |
Speed symbol | Please refer to the "Speed Symbol/Conveyor Speed Table" | ||||
![]() |
Controller installation direction *1 | R:搬送方向右側 T:コントローラ無し※2 | ||||
![]() |
Motor Output | N: constant speed | 09:90W | |||
| F:インバータ変速 | ||||||
![]() |
Input Power | X: 100V single phase Y: 200V single phase Z: 200V three phase | ||||
| 搬送質量 ※3 | MAX.10kg/m | |||||
- Please check here for details
- T:コントローラ無しは、N:定速のみ適用します。
- The payload varies depending on the speed. Please refer to "Guideline for payload."
- Be careful not to spray water directly onto the drive unit.
- We can also manufacture products other than the standard specifications, so please contact us for details.
- If the length exceeds 3m, delivery will be divided into parts.
- The controller is attached to the leg.
Standard specification power supply compatibility table

Dimensions

Estimated payload
The graph below shows the transport mass at a constant speed with a distributed load.
Note) In the case of variable speed models, when the conveying speed drops to 1/3 of the maximum speed, the conveying mass drops to 40% of the maximum speed.
Speed symbol/Conveyor speed table

- 1. 色文字 は準標準速度を表します。
2. 表は無負荷時の公称速度を表します。
3. 速度は負荷により±10%程度変動します。

JME
30
D
R
300
F18
R
09
X