JabconJMC
Detachable curved belt type (for light loads)
The waterproof motor makes it easy to wash the entire unit after use.
About the various icons
動画
specification
|
- |
|
 |
Model code | JMC (Friction Drive Curve) | |||||
|---|---|---|---|---|---|---|---|
 |
Nominal width | 20 | 30 | 40 | 50 | ||
| BW Effective belt width (mm) | 200 | 300 | 400 | 500 | |||
| Inner radius (mm) | 200 | ||||||
 |
Curve Angle | 90：90° | |||||
| Standard Belt | Resin curved belt (1 ply) | ||||||
| End Roller Diameter | φ21 | ||||||
 |
Drive unit type *1 | D: Subscript | |||||
 |
Conveying direction *2 | R: Right (clockwise) L: Left (counterclockwise) |
|||||
 |
Speed symbol | Please refer to the "Speed Symbol/Conveyor Speed Table" | |||||
 |
Controller installation direction *2 | R: Right side when viewed from the outside L: Left side when viewed from the outside |
|||||
 |
Motor Output | F：インバータ変速 | 09: 90W (IP65 waterproof motor) | ||||
 |
Input Power | X: 100V single phase Y: 200V single phase Z: 200V three phase | |||||
| 搬送質量 | Variable speed 5kg/unit | ||||||
- Please check here for details
- For details, please refer to "Transport direction and controller installation direction."
- Do not allow oil, water or transported debris to come into contact with the drive pulley.
- The waterproof control box is equipped with a reversible switch, allowing you to change the conveying direction.
- We also manufacture products with specifications other than the standard, so please contact us for details.
Dimensions
Belt width selection chart
Speed symbol/Conveyor speed table
- 1. 色文字 は準標準速度を表します。
2. 表は無負荷時の公称速度を表します。速度は負荷により±10％程度変動します。
3. ベルト幅により速度は変動します。
Conveying direction and controller installation direction
- Depending on the width and height of the machine, it may not be possible to install it in the specified direction.