Belcon MiniMXY
Sliding type merging device for small items (slat type)
Placed on slats, it merges softly and quickly. Processing capacity is up to 300 pieces per minute.
About the various icons
MXY introduction video
specification
*Colored text is semi-standard.
| Model code (mm) | MXY (steel) | ||
|---|---|---|---|
| Machine width (mm) *1 | 667 | ||
| Length (mm) | 1,116 | ||
| Machine height (mm) | Min. 350 - Max. 1,120 | ||
| Merging capacity *2 | MAX.300 pieces/min | ||
| Number of junctions | 3Confluence | ||
| Slide pitch (mm) | 150 | ||
| Slat width (mm) | 150 | ||
| End diameter (slat surface) (mm) | φ100 | ||
| Drive system | #35 Oil-free chain | ||
| Mounting direction of drive unit | Right side of conveying direction Left side of conveying direction | ||
| Speed symbol | Please refer to the "Speed Symbol/Speed Table" | ||
| Control panel installation direction | Right side of conveying direction Left side of conveying direction | ||
| Motor Output | |||
| F: Inverter speed change *3 | 100W 200W | ||
| Input Power | AC100V single phase AC200V single phase AC200V three phase | ||
| Transport mass | 100g/cm MAX.2.5kg/unit | ||
| Standard dimensions of transported items | W: MAX.125mm L: MIN.60~MAX.300mm H: MIN.15mm | ||
- If the machine height H is less than 450 mm, the control panel will protrude 273 mm from the mounting side.
- The merging capacity varies depending on the size of the transported items.
- "F" indicates that the product is made by Mitsubishi. Speed symbols F28 and below are 100W.
Dimensions
Estimated size of transported items
Speed symbol/speed table
- 1. The inverter speed will fluctuate by approximately ±10% depending on the load.
2. Only Mitsubishi inverters are available.