Belcon MiniMXS
Sliding branching device for small items (slat type)
Softly distributes 300 items per minute. Ideal for high-speed production lines for small items.
About the various icons
specification
*Colored text is semi-standard.
| Model code (mm) | MXS (steel) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Machine width (mm) *1 | 667 | ||||||||||
| Length (mm) | 1,116 | ||||||||||
| Machine height (mm) | Min. 350 - Max. 1,120 | ||||||||||
| Branching Ability *2 | MAX.300 pieces/min | ||||||||||
| Number of branches | 3-branch | ||||||||||
| Slide pitch (mm) | 150 | ||||||||||
| Slat width (mm) | 150 | ||||||||||
| End diameter (slat surface) (mm) | φ100 | ||||||||||
| Drive system | #35 Oil-free chain | ||||||||||
| Mounting direction of drive unit | Right side of conveying direction Left side of conveying direction | ||||||||||
| Speed symbol | Please refer to the "Speed Symbol/Conveyor Speed Table" | ||||||||||
| Control panel installation direction | Right side of conveying direction Left side of conveying direction | ||||||||||
| Motor output *3 | 100W 200W | ||||||||||
| Input Power | AC100V single phase AC200V single phase AC200V three phase | ||||||||||
| Transport mass | 100g/cm MAX.2.5kg/unit | ||||||||||
| Standard dimensions of transported items | W:MAX． 125mm L:MIN. 60〜MAX. 300mm H:MIN. 15mm | ||||||||||
- If the machine height H is less than 450 mm, the control panel will protrude 273 mm from the mounting side.
- Branching capacity varies depending on the size of the transported goods.
- "F" indicates that the product is made by Mitsubishi. Speed symbols F28 and below are 100W.
Dimensions
Estimated size of transported items
Speed symbol/speed table
- 1. The inverter speed will fluctuate by approximately ±10% depending on the load.
2. Only Mitsubishi inverters are available.