Product Information

HOME > Product Information > Conveyor Equipment > Light Conveyor > Belcon Mini > Belcon Mini III / DPG

Belcon Mini IIIDPG

Detachable belt, non-snake type

A belt detachable mechanism is standard equipment. Belt cleaning and maintenance are easy. Reliable conveying even under severe conveying conditions such as forward and reverse operation.

Belcon Mini III / DPG
    Belcon Mini III / DPG
    Web Catalog

    specification

    Model example
    DPG 30 D R 150 D13 R 04 X

    *Colored text is semi-standard.

    Model code DPG (center drive, detachable belt, no meandering)
    Nominal width 20 25 30 35 40 50 60
    BW Actual belt width (mm) 197 247 297 347 397 497 597
    FW Frame width (mm) 245 295 345 395 445 545 645
    Captain *1 (cm) Min. 90 - Max. 1,200
    Machine height (mm) 640≦Machine height H≦1,040
    Standard Belt Resin belt with anti-snake bars (1 ply)
    End Pulley Diameter φ27.2
    Drive unit type *2 D: Subscript (parallel axis)
    Mounting direction of drive unit *2 R: Right side of conveying direction L: Left side of conveying direction
    Speed symbol Please refer to the "Speed Symbol/Conveyor Speed Table"
    Controller installation direction *2 R：搬送方向右側　L：搬送方向左側　T：コントローラ無し※4
    モータ出力 ※3 N: constant speed 04:40W 06:60W 09:90W
    D：ブラシレス変速 04：40W　09：90W
    F：インバータ変速 04:40W 06:60W 09:90W
    Input Power X: 100V single phase Y: 200V single phase Z: 200V three phase
    搬送質量※5 MAX. 50kg/unit
    1. The maximum speed for the high-speed model is 400.
    2. Please check here for details
    3. The high-speed motor output is 90W.
    4. T：コントローラ無しは、N：定速の入力電源Z：200V三相のみ適用します。
    5. For motor output, refer to "Guideline for payload."
    • We can also manufacture products other than the standard specifications, so please contact us for details.

    Dimensions

    Note) Please see here for the frame cross section.

    Estimated payload

    Note: The graph/table below shows the transport mass when the load is distributed horizontally.

    Motor output standard setting list

    Note: If you need to upgrade the motor output depending on the speed, payload, and other operating conditions, please select the motor output using the payload graph above.

    Speed symbol/Conveyor speed table

    • 1. 色文字 は準標準速度を表します。
      2. 定速とインバータ変速の速度は、負荷により±10%程度変動します。
      3. ブラシレス変速時の負荷による速度変動は±1%以内です。
    none