Product Information

HOME > Product Information > Conveyor Equipment > Light Conveyor > Belcon Mini > Belcon Mini III / DMZ

Belcon Mini IIIDMZ

Top and bottom horizontal type

Smooth inclined transport with a horizontal section + inclined section + horizontal section.

Belcon Mini III / DMZ
About the various icons
Belcon Mini III / DMZ
Web Catalog

specification

Model example
DMZU 30 D R 505 D13 R 09 X 100

*Colored text is semi-standard.

Model code DMZU (center drive uphill)
DMZD (center drive downhill)
Nominal width 20 25 30 35 40 50 60
BW Actual belt width (mm) 197 247 297 347 397 497 597
FW Frame width (mm) 245 295 345 395 445 545 645
Captain
(Upper L1 +
Inclined part L2)
(cm)		 Upbound 1 140≦(Upper horizontal captain L1 + inclined part captain L2)≦505
Upbound 2 193≦(Upper horizontal captain L1 + inclined part captain L2)≦505
Downstream 193≦(Upper horizontal captain L1 + inclined part captain L2)≦505
Standard Belt Inclined section: Resin belt with bars for preventing meandering for steep inclines (1 ply)
Lower feeder section: Resin belt with anti-snake bars (1 ply)
End Pulley Diameter φ27.2
Drive unit type *1 D: Subscript S: Slim (optional)
Mounting direction of drive unit *1 R: Right side of conveying direction L: Left side of conveying direction
Speed symbol Please refer to the "Speed Symbol/Conveyor Speed Table"
Controller installation direction *1 R：搬送方向右側　L：搬送方向左側　T：コントローラ無し※2
Motor Output N: constant speed 06:60W 09:90W
D：ブラシレス変速 04：40W　09：90W
F：インバータ変速 06:60W 09:90W
Input Power X: 100V single phase Y: 200V single phase Z: 200V three phase
Lower horizontal pilot length L3 (cm) 60≦Lower horizontal captain L3≦100
搬送質量 ※3 MAX.30kg/unit
  1. Please check here for details
  2. T：コントローラ無しは、N：定速の入力電源Z：200V三相のみ適用します。
  3. For motor output, refer to "Guideline for payload."
  • We can also manufacture products other than the standard specifications, so please contact us for details.

Dimensions

  • 1. For downward transport, the drive unit is attached to the inclined section.
    2. Please see here for the frame cross section.

Estimated payload

Note: The graph/table below shows the transport mass when the load is distributed horizontally.

Motor output standard setting list

Note: If you need to upgrade the motor output depending on the speed, payload, and other operating conditions, please select the motor output using the payload graph above.

Speed symbol/Conveyor speed table

  • 1. 色文字 は準標準速度を表します。
    2. 定速とインバータ変速の速度は、負荷により±10%程度変動します。
    3. ブラシレス変速時の負荷による速度変動は±1%以内です。
none