HOME > Product Information > Conveyor Equipment > Light Conveyor > Belcon Mini > Belcon Mini III / DML
Belcon Mini IIIDML
LED backlight type
The belt surface illumination is approximately 6,000 lux. A conveyor for visual inspection to check for foreign matter contamination.
About the various icons
specification
 DML |
 25 |
 D |
 R |
 120 |
 D11 |
 R |
 04 |
 X |
*Colored text is semi-standard.
|
Model code | DML (Center drive LED backlight type) | |
|---|---|---|---|
|
Nominal width | 25 | |
| BW Actual belt width (mm) | 247 | ||
| FW Frame width (mm) | 295 | ||
|
Captain (cm) | 120 | |
| Standard Belt | Light-transmitting resin belt (2-ply) | ||
| End Pulley Diameter | φ27.2 | ||
|
Drive unit type *1 | D: Subscript | |
|
Mounting direction of drive unit *1 | R: Right side of conveying direction L: Left side of conveying direction | |
|
Speed symbol | Please refer to the "Speed Symbol/Conveyor Speed Table" | |
|
Controller installation direction *1 | R: Right side of conveying direction L: Left side of conveying direction | |
|
Motor Output | N: constant speed | 02: 25W |
| D：ブラシレス変速 | 04：40W | ||
| F：インバータ変速 | 02: 25W | ||
|
Input Power | X: 100V single phase Y: 200V single phase Z: 200V three phase | |
| light source | LED with dimmer (illumination range 214W x 780L [mm]) White | ||
| Belt surface illuminance | 6000 lux | ||
| Transport mass | MAX.10kg/unit | ||
- The conveyor and LED have separate power cords, but the same voltage is standard.
The brushless motor and LED operate by missing one phase when using a three-phase power supply. The power cables for both the conveyor and the LED are 3m long.
- Please check here for details
- We can also manufacture products other than the standard specifications, so please contact us for details.
Dimensions
Note) Please see here for the frame cross section.
Speed symbol/Conveyor speed table
- 1. 色文字 は準標準速度を表します。
2. 定速とインバータ変速の速度は、負荷により±10%程度変動します。
3. ブラシレス変速時の負荷による速度変動は±1%以内です。