HOME > Product Information > Conveyor Equipment > Light Conveyor > Belcon Mini > Belcon Mini III / DMG
Belcon Mini IIIDMG
Meander-less type
Reliable transport even under severe transport conditions such as forward and reverse operation.
About the various icons
- Web Catalog
View and purchase products on the online shopping site
specification
 DMG |
 30 |
 D |
 R |
 300 |
 D18 |
 R |
 09 |
 X |
*Colored text is semi-standard.
|
Model code | DMG (center drive, no serpentine) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Nominal width | 05 | 07 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 50 | 60 | |
| BW Actual belt width (mm) | 47 | 72 | 97 | 147 | 197 | 247 | 297 | 347 | 397 | 497 | 597 | ||
| FW Frame width (mm) | 95 | 120 | 145 | 195 | 245 | 295 | 345 | 395 | 445 | 545 | 645 | ||
|
Captain *1 (cm) | Nominal width 05/07: MIN.55 - MAX.600 Nominal width 10 to 60: MIN.55 to MAX.1200 |
|||||||||||
| Standard Belt | Resin belt with anti-snake bars (1 ply) | ||||||||||||
| End Pulley Diameter | φ27.2 | ||||||||||||
|
Drive unit type *2 *3 | D: Subscript S: Slim (optional) | |||||||||||
|
Mounting direction of drive unit *2 | R: Right side of conveying direction L: Left side of conveying direction | |||||||||||
|
Speed symbol | Please refer to the "Speed Symbol/Conveyor Speed Table" | |||||||||||
|
Controller installation direction *2 | R：搬送方向右側 L：搬送方向左側 T：コントローラ無し※4 | |||||||||||
|
Motor output *5 | N: constant speed | 04:40W 06:60W 09:90W | ||||||||||
| D：ブラシレス変速 | 04：40W 09：90W | ||||||||||||
| F：インバータ変速 | 04:40W 06:60W 09:90W | ||||||||||||
|
Input Power | X: 100V single phase Y: 200V single phase Z: 200V three phase | |||||||||||
| 搬送質量 ※6 | MAX. 50kg/unit | ||||||||||||
- The maximum speed for the high-speed model is 400.
- Please check here for details
- The high-speed drive unit type is D: bottom mounted only.
- T：コントローラ無しは、N：定速の入力電源Z：200V三相のみ適用します。
- The high-speed motor output is 90W.
- For motor output, refer to "Guideline for payload."
- We can also manufacture products other than the standard specifications, so please contact us for details.
Dimensions
Note) For frame cross section, motor protrusion dimensions (dimension A in the diagram above), and controller protrusion dimensions, please see here.
Estimated payload
Note: The graph/table below shows the transport mass when the load is distributed horizontally. 
Motor output standard setting list
Note: If you need to upgrade the motor output depending on the speed, payload, and other operating conditions, please select the motor output using the payload graph above. 
Speed symbol/Conveyor speed table
- 1. 色文字 は準標準速度を表します。
2. 定速とインバータ変速の速度は、負荷により±10%程度変動します。
3. ブラシレス変速時の負荷による速度変動は±1%以内です。
Belt meandering adjustment/belt replacement video
Please refer to the explanatory video on belt meander adjustment and belt replacement available here.