Belcon Mini IIIDMD

Model example

DMD

15

D

R

200

D13

R

04

X

*Colored text is semi-standard.

	Model code		DMD (center drive, double belt type)
	Nominal width		15	25
BW Actual belt width (mm)			47 (×2 columns)	97 (×2 columns)
FW Frame width (mm)			195	295
	Captain (cm)		MIN.65〜MAX.300
Standard Belt			Resin belt with anti-snake bars (1 ply) x 2 rows
End Pulley Diameter			φ27.2
	Drive unit type *1		D: Subscript
	Mounting direction of drive unit *1		R: Right side of conveying direction L: Left side of conveying direction
	Speed symbol		Please refer to the "Speed Symbol/Conveyor Speed Table"
	Controller installation direction *1		R：搬送方向右側　L：搬送方向左側　T：コントローラ無し※3
	モータ出力 ※2	N: constant speed	04:40W 06:60W 09:90W
		D：ブラシレス変速	04：40W　09：90W
		F：インバータ変速	04:40W 06:60W 09:90W
	Input Power		X: 100V single phase Y: 200V single phase Z: 200V three phase
搬送質量 ※4			MAX.30kg/unit

1. Please check here for details
2. The high-speed motor output is 90W.
3. T：コントローラ無しは、N：定速の入力電源Z：200V三相のみ適用します。
4. The payload varies depending on the speed. Please refer to "Guideline for payload."

• We can also accommodate non-standard belt gap dimensions, so please contact us for details.
• When replacing the belt, both must be replaced at the same time.

Note) For frame cross section and motor protrusion dimensions (dimension A in the diagram above), please refer here.

Note: The graph/table below shows the transport mass when the load is distributed horizontally.

Note: If you need to upgrade the motor output depending on the speed, payload, and other operating conditions, please select the motor output using the payload graph above.

• 1. 色文字 は準標準速度を表します。
  2. 定速とインバータ変速の速度は、負荷により±10%程度変動します。
  3. ブラシレス変速時の負荷による速度変動は±1%以内です。