Product Information

HOME > Product Information > Conveyor Equipment > Light Conveyor > Belcon Mini > Belcon Mini Petacon 40 / DHQ

Belcon Mini Petacon 40Petacon 40
DHQ (Standard Type)
DHQR (Roller Edge Type)

Ultra-thin belt conveyor with no protrusions on the bottom surface

Belcon Mini Petacon 40 / DHQ
About the various icons
Belcon Mini Petacon 40 / DHQ

specification

Model example
DHQ 25 P L 100 S16 D

*Colored text is semi-standard.

Model code DHQ (Head drive standard) DHQR (Head drive upstream roller edge)
Nominal width 20 25 30 35 40 50
BW Actual belt width (mm) 195 245 295 345 395 495
FW Frame width (mm) 245 295 345 395 445 545
Captain (cm) *1 DHQ *2 Nominal width 20: MIN.25 to MAX.150
Nominal width 25 to 50: MIN. nominal width x 1.2 to MAX. 150
DHQR Nominal width 20-30: MIN.40-MAX.150
Nominal width 35 to 50: MIN. nominal width x 1.2 to MAX. 150
Drive Type P:モータプーリ
Standard Belt Resin flat belt (1 ply)
End Pulley Diameter DHQ: φ27.2 DHQR: R8
Lead wire pull-out direction R: Right side of conveying direction L: Left side of conveying direction (standard) *Driver board mounting direction
Speed symbol S: 06, 10, 13, 16, 19, 22, 25, 28 *Selectable speed
Motor Output DC brushless motor roller (20W)
Input Power D: DC24V (X: AC100V single phase Y: AC200V single phase Z: AC200V three phase)
Payload *3 MAX.5kg/unit
  1. If the machine length is 300mm or less, the driver board will be installed separately.
  2. DHQs with a length of 450mm or less do not have a belt release device.
  3. The conveying capacity varies depending on the speed. Please refer to "Guideline for conveying mass."
  • Depending on the specifications such as belt width and machine length, a return roller may be attached.

Driver board specifications

  • Motor: DC24V, 0.8A (rated current)
  • Power supply capacity /DC24V 3A or more
  • Operating temperature: 0 to 40°C (no condensation)
  • Board size: length 124 x height 34 x depth 19.5 mm
  • Protection fuse /4A
  • Temperature protection /thermal (board temperature above 65°C)
  • Others /Slow start/Slow down function
  • If you are using it in an AC (alternating current) environment, an optional power supply box (DC conversion box) is available.
  • ・When the power supply box is attached to the conveyor body, it protrudes 60.5 mm in the width direction of the frame. Power supply box dimensions: length 164 x height 40 x depth 60.5 mm
    - If the input power supply is three phases, one phase is left out at the input.

Dimensions

  • 1. The standard mounting orientation of the driver board is on the left side of the transport direction.
    2. When the driver board and power supply box are installed on the same side of the conveyor frame, the minimum length is DHQ: 750 mm, DHQR: 700 mm. (For shorter lengths, the intermediate harness between the driver board and power supply box will be manufactured separately.)
    3. For details on the driver board, please see here.
    4. Please see here for the frame cross section.

Speed and payload guidelines

  • 1. Eight speeds can be selected using the DIP switch or an external signal.
    2. The above table shows the transport mass when the load is distributed horizontally.
    3. Speed may vary depending on the load.
none