HOME > Product Information > Conveyor Equipment > Light Conveyor > Belcon Mini > Belcon Mini III / DHK
Belcon Mini IIIDHK
Belt type with horizontal bars
Ideal for transporting on steep inclines.
About the various icons
specification
 DHK |
 30 |
 U |
 R |
 300 |
 D18 |
 R |
 09 |
 X |
*Colored text is semi-standard.
|
Model code | DHK (Head Drive Belt with Cross Bars) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|
Nominal width | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 50 | 60 | |
| BW Actual belt width (mm) | 90 | 140 | 190 | 240 | 290 | 340 | 390 | 490 | 590 | ||
| FW Frame width (mm) | 145 | 195 | 245 | 295 | 345 | 395 | 445 | 545 | 645 | ||
|
Captain (cm) | Nominal width 10 to 50: MIN. 100 to MAX. 400 Nominal width 60: MIN.120 - MAX.400 |
|||||||||
| Standard belt *1 | Resin belt with cross bars (2-ply) | ||||||||||
| End Pulley Diameter | φ57 | ||||||||||
|
Drive unit type *2 *3 | D: Downward U: Upper H: Horizontal (hollow shaft) |
|||||||||
|
Mounting direction of drive unit *2 | R: Right side of conveying direction L: Left side of conveying direction | |||||||||
|
Speed symbol | Please refer to the "Speed Symbol/Conveyor Speed Table" | |||||||||
|
Controller installation direction *2 | R：搬送方向右側 L：搬送方向左側 T：コントローラ無し※4 | |||||||||
|
Motor Output | N: constant speed | 06:60W 09:90W | ||||||||
| D：ブラシレス変速 | 04：40W 09：90W | ||||||||||
| F：インバータ変速 | 06:60W 09:90W | ||||||||||
|
Input Power | X: 100V single phase Y: 200V single phase Z: 200V three phase | |||||||||
| 搬送質量 ※5 | MAX.30kg/unit | ||||||||||
- The width of the cross bar is the same as the actual BW belt width.
- Please check here for details.
- If you select the horizontal (hollow shaft) specification for the drive unit, please select a 90W motor output with a fixed speed or inverter variable speed.
Fixed speed is only available with 200V three-phase input power. - T：コントローラ無しは、N：定速の入力電源Z：200V三相のみ適用します。
- For motor output, refer to "Guideline for payload."
- We also manufacture non-standard specifications such as meander-less types (DHKG), so please contact us for details.
Dimensions
- 1. The motor cover is only attached to the drive unit type U: top mounted.
2. Please refer here for the frame cross section, motor or motor cover protrusion dimensions (dimension A in the diagram above), and controller protrusion dimensions.
Estimated payload
Note: The graph/table below shows the payload when the load is distributed. 
Motor output standard setting list
Note: If you need to upgrade the motor output depending on the operating conditions such as speed or the amount of material being transported, please select the motor output using the transport mass graph above.
Speed symbol/Conveyor speed table
- 1. 色文字 は準標準速度を表します。
2. 定速とインバータ変速の速度は、負荷により±10%程度変動します。
3. ブラシレス変速時の負荷による速度変動は±1%以内です。
4. 中空軸を選択する場合は、モータ出力に90Wの定速かインバータ変速を選択してください。
定速は入力電源200V三相のみとなります。