HOME > Product Information > Conveyor Equipment > Light Conveyor > Belcon Mini > Belcon Mini III / DHH
Belcon Mini IIIDHH
Head drive standard type
DHH is easy to maintain and ideal for transporting special items.
About the various icons
specification
 DHH |
 30 |
 D |
 R |
 300 |
 D18 |
 R |
 09 |
 X |
*Colored text is semi-standard.
|
Model code | DHH (Head Drive Standard) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Nominal width | 07 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 50 | 60 | |
| BW Actual belt width *1 (mm) | 72 | 97 | 147 | 197 | 247 | 297 | 347 | 397 | 497 | 597 | ||
| FW Frame width (mm) | 120 | 145 | 195 | 245 | 295 | 345 | 395 | 445 | 545 | 645 | ||
|
Captain *2 (cm) | Nominal width 07: MIN.100 - MAX.600 Nominal width 10 to 50: MIN. 100 to MAX. 800 Nominal width 60: MIN.120 - MAX.800 |
||||||||||
| Standard Belt | Resin flat belt (1 ply) | |||||||||||
| End Pulley Diameter | φ27.2 | |||||||||||
|
Drive unit type *3 *4 | D: Downward (parallel shaft) U: Upward (parallel shaft) H: Horizontal (hollow shaft) | ||||||||||
|
Mounting direction of drive unit *3 | R: Right side of conveying direction L: Left side of conveying direction | ||||||||||
|
Speed symbol | Please refer to the "Speed Symbol/Conveyor Speed Table" | ||||||||||
|
Controller installation direction *3 | R：搬送方向右側 L：搬送方向左側 T：コントローラ無し※5 | ||||||||||
|
Motor output *6 | N: constant speed | 02:25W 04:40W 06:60W 09:90W | |||||||||
| D：ブラシレス変速 | 04：40W 09：90W | |||||||||||
| F：インバータ変速 | 02:25W 04:40W 06:60W 09:90W | |||||||||||
|
Input Power | X: 100V single phase Y: 200V single phase Z: 200V three phase | ||||||||||
| 搬送質量 ※7 | MAX. 50kg/unit | |||||||||||
- If the length of the device exceeds 400 cm, the actual belt width will be 7 mm narrower.
- The maximum length of the high-speed version is 400. The maximum length of the nominal width 07 version is 600.
- Please check here for details
- If you select the horizontal (hollow shaft) specification for the drive unit, please select a 90W motor output with a fixed speed or inverter variable speed.
Fixed speed is only available with 200V three-phase input power. - T：コントローラ無しは、N：定速の入力電源Z：200V三相のみ適用します。
- The high-speed motor output is 90W.
- For motor output, refer to "Guideline for payload."
- We can also manufacture products other than the standard specifications, so please contact us for details.
Dimensions
Note) For frame cross section, parallel shaft motor protrusion dimensions (dimension A in the diagram above), and controller protrusion dimensions, please see here.
Estimated payload
Note: The graph/table below shows the transport mass when the load is distributed horizontally. 
Motor output standard setting list
Note: If you need to upgrade the motor output depending on the speed, payload, and other operating conditions, please select the motor output using the payload graph above. 
Conveyor Speed Table
- 1. 色文字 は準標準速度を表します。
2. 定速とインバータ変速の速度は、負荷により±10%程度変動します。
3. ブラシレス変速時の負荷による速度変動は±1%以内です。
4. 中空軸を選択する場合は、モータ出力に90Wの定速かインバータ変速を選択してください。定速は入力電源200V三相のみとなります。