Product Information

HOME > Product Information > Conveyor Equipment > Light Conveyor > Belcon Mini > Belcon Mini III / DHG

Belcon Mini IIIDHG

Head drive meander-less type

Ideal for transporting special items under harsh conditions.

Belcon Mini III / DHG
About the various icons
Belcon Mini III / DHG
Web Catalog

specification

Model example
DHG 30 D R 300 D18 R 09 X

*Colored text is semi-standard.

Model code DHG (Head Drive Snake-less)
Nominal width 07 10 15 20 25 30 35 40 50 60
BW Actual belt width (mm) 72 97 147 197 247 297 347 397 497 597
FW Frame width (mm) 120 145 195 245 295 345 395 445 545 645
Captain *1 (cm) Nominal width 07: MIN.100 - MAX.600
Nominal width 10 to 60: MIN.100 to MAX.800
Standard Belt Resin belt with anti-snake bars (1 ply)
End Pulley Diameter φ27.2
Drive unit type *2 *3 D: Downward (parallel shaft) U: Upward (parallel shaft) H: Horizontal (hollow shaft)
Mounting direction of drive unit *2 R: Right side of conveying direction L: Left side of conveying direction
Speed symbol Please refer to the "Speed Symbol/Conveyor Speed Table"
Controller installation direction *2 R：搬送方向右側　L：搬送方向左側　T：コントローラ無し※4
Motor output *5 N: constant speed 04:40W 06:60W 09:90W
D：ブラシレス変速 04：40W　09：90W
F：インバータ変速 04:40W 06:60W 09:90W
Input Power X: 100V single phase Y: 200V single phase Z: 200V three phase
搬送質量 ※6 MAX. 50kg/unit
  1. The maximum speed for the high-speed model is 400.
  2. Please check here for details
  3. If you select the horizontal (hollow shaft) specification for the drive unit, please select a 90W motor output with a fixed speed or inverter variable speed.
    Fixed speed is only available with 200V three-phase input power.
  4. T：コントローラ無しは、N：定速の入力電源Z：200V三相のみ適用します。
  5. The high-speed motor output is 90W.
  6. For motor output, refer to "Guideline for payload."
  • We can also manufacture products other than the standard specifications, so please contact us for details.

Dimensions

Note) For frame cross section, parallel shaft motor protrusion dimensions (dimension A in the diagram above), and controller protrusion dimensions, please see here.

Estimated payload

Note: The graph/table below shows the transport mass when the load is distributed horizontally.

Motor output standard setting list

Note: If you need to upgrade the motor output depending on the speed, payload, and other operating conditions, please select the motor output using the payload graph above.

Speed symbol/Conveyor speed table

  • 1. 色文字 は準標準速度を表します。
    2. 定速とインバータ変速の速度は、負荷により±10%程度変動します。
    3. ブラシレス変速時の負荷による速度変動は±1%以内です。
    4. 中空軸を選択する場合は、モータ出力に90Wの定速かインバータ変速を選択してください。定速は入力電源200V三相のみとなります。
none