Gravity Roller ConveyorSRS type

■ Roller outer diameter x thickness: φ57 x t1.5mm (equivalent to SUS430J1L)
■ Shaft dimensions: φ12mm pipe (SUS304)
■Frame: [90×30×t2.0mm (SUS304)
■Roller individual production range (RW): 90 to 790 mm

• If you require a roller width greater than 690RW, please contact our sales department.

Model and specifications

■Straight				■ Curve
SRS 400 75	×	2000		SRS 400 100	R ×	90

Unit: mm

	Model	SRS (stainless steel, for medium loads)
RW Nominal roller width (mm)		90	150	240	305	390	490	620	690
	FW Frame inner width (mm)	100	160	250	315	400	500	630	700
Machine width FW+60 (mm)		160	220	310	375	460	560	690	760
	P Roller pitch (mm) *1	75、100、150
	L Captain length (mm)	500、1,000、1,500、2,000、2,500、3,000
	Curve angle *2	30°、45°、60°、90°

1. If the machine length is 1m and 2m and the roller pitch (P) is 75 and 150, the actual roller pitch will be 77 and 154 respectively.
2. The curve applies to roller pitches (P) of 75 and 100 with a nominal roller width of 240 mm or more.

Note: The above figures are for no impact.

Note) The above is calculated with an allowable bending stress of 100 MPa and a deflection of 1/500.