Product Information

HOME > Product Information > Conveyor Equipment > Gravity Conveyors > Roller Conveyor > Gravity Roller Conveyor / SRM

Gravity Roller ConveyorSRM type

Roller diameter φ57 for heavy loads

A heavy-duty steel Roller Conveyor with a roller diameter of φ57 and a shaft diameter of φ16.

Gravity Roller Conveyor / SRM
About the various icons
Gravity Roller Conveyor / SRM
Web Catalog
  • *Please contact us separately regarding guides for heavy loads.

Product overview

■ Roller outer diameter x thickness: φ57 x t1.4mm
■ Shaft dimensions: φ16mm pipe
■Frame: [90×30×t3.2（4.5）mm
■Roller individual production range (RW): 90 to 1,290 mm

  • If you require a roller width greater than 990RW, please contact our sales department.

specification

Model and specifications
■Straight ■ Curve
SRM 700 75
×
3000 B(C)
　
SRM 700 75
R ×
90 B(C)

Unit: mm

1 Model SRM (steel, heavy load)
RW Nominal roller width (mm) 90 150 240 305 390 490 620 690 790 890 990
2 FW Frame inner width (mm) 100 160 250 315 400 500 630 700 800 900 1,000
Machine width FW+60 (mm) 160 220 310 375 460 560 690 760 860 960 1,060
3 P Roller pitch *1 (mm) 75、100、150
2 L Captain length (mm) 500、1,000、1,500、2,000、2,500、3,000
2 Curve angle *2 30°、45°、60°、90°
2 Frame (mm) ［90×30×t3.2(B), 4.5(C)
  1. If the machine length is 1m and 2m and the roller pitch (P) is 75 and 150, the actual roller pitch will be 77 and 154 respectively.
  2. Curves are applicable for nominal roller widths of 240mm or more. (For nominal widths of 890mm and 990mm, a 90° curve is divided into two 45° units.)

Dimensions

Body weight table (B frame)

Allowable load


Note: The above figures are for no impact.


Note) The above is calculated with an allowable bending stress of 100 MPa and a deflection of 1/500.

none