Gravity Roller ConveyorMMR type

■ Roller outer diameter x thickness: φ60.5 x t3.8mm
■ Shaft dimensions: φ16mm pipe
■Frame: [90×30×t3.2（4.5）mm
■Roller individual production range (RW): 90 to 1,590 mm

• If you require a roller width greater than 990RW, please contact our sales department.

Model and specifications

■Straight				■ Curve
MMR 700 75	×	3000 B(C)		MMR 700 75	R ×	90 B(C)

Unit: mm

	Model	MMR (steel, heavy load)
RW Nominal roller width (mm)		90	150	240	305	390	490	620	690	790	890	990
	FW Frame inner width (mm)	100	160	250	315	400	500	630	700	800	900	1,000
Machine width FW+60 (mm)		160	220	310	375	460	560	690	760	860	960	1,060
	P Roller pitch *1 (mm)	75、100、150
	L Captain length (mm)	1,000、1,500、2,000、3,000
	Curve angle *2	45°、90°
	Frame (mm)	90×30×t3.2(B), 4.5(C)

1. If the machine length is 1m and 2m and the roller pitch (P) is 75 and 150, the actual roller pitch will be 77 and 154 respectively.
2. Curves are applicable for nominal roller widths of 240mm or more. (For nominal widths of 890mm and 990mm, a 90° curve is divided into two 45° units.)

Note: The above figures are for no impact.

Note) The above is calculated with an allowable bending stress of 100 MPa and a deflection of 1/500.