HOME > Product Information > Conveyor Equipment > Gravity Conveyors > Roller Conveyor > Gravity Roller Conveyor / EBRD
Gravity Roller ConveyorEBRD type
Roller diameter φ18 for small light loads
This type incorporates BES rollers into a frame that matches the wingspan of Jabcon II.
About the various icons
- Web Catalog
-
- Product Page
- Recommended legs:
- Line configuration equipment
- guide
- *Some guides may not be suitable, so please consult us before selecting one.
Product overview
■ Roller diameter x thickness: φ18 x t1.2mm (antibacterial resin PVC)
■ Shaft dimensions: φ6mm round steel (SUS304)
■Frame: [40 x 22.5 x t2.0mm (SUS304)
■Roller individual production range (RW): 72 to 397 mm
- If you require a roller width less than 90RW, please contact our sales department.
specification
| ■Straight | ||||||
|---|---|---|---|---|---|---|
|
× |
|
Unit: mm
 |
Model | EBRD (plastic, for small, light loads) | |||||
|---|---|---|---|---|---|---|---|
| RW Nominal roller width *1 (mm) | 90 | 140 | 190 | 240 | 290 | 390 | |
 |
FW Frame inner width (mm) | 100 | 150 | 200 | 250 | 300 | 400 |
| Machine width FW+45 (mm) | 145 | 195 | 245 | 295 | 345 | 445 | |
 |
P Roller pitch (mm) | 20、30、40 | |||||
 |
L machine length (mm) | 20P, 40P: 500, 1,000, 1,500, 2,000 30P: 480, 990, 1,500, 1,980 |
|||||
- We also manufacture rollers with a nominal width of 340 mm.
Dimensions
Body mass table
Allowable load
Note: The above figures are for no impact.
Note) The above is calculated with an allowable bending stress of 100 MPa and a deflection of 1/500.