Unicon JrQLJ (Jump Unit)
Line Drive Conveyor
This unit allows you to change the position of the drive shaft midway through the line and change the speed (1:1.5).
About the various icons
specification
| Model | QLJ (Jump Unit) | |||
|---|---|---|---|---|
| RW nominal roller width (mm) | 305 | 390 | 490 | 620 |
| FW frame inner width (mm) | 315 | 400 | 500 | 630 |
| W Outer frame width (mm) | 375 | 460 | 560 | 690 |
| Roller pitch (mm) | 40、80 | |||
| L length (mm) | 560≦L≦2,000 | |||
| Minimum machine height (mm) | 300 | |||
| Frame (mm) | ［ 60×30×t2.3 | |||
| Carrier Roller | φ31.8 Grooved | |||
| belt | Urethane round belt | |||
| gear ratio | 1：1 1：1.5 | |||
- We can also manufacture products other than the standard specifications, so please contact us for details.
Example of changing the drive shaft position
- In curve units, the drive shaft under the carrier roller is attached to the inside of the curve, so a jump unit is required for S-shaped lines like the one shown above.
Body mass table
Dimensions
