Product Information

HOME​ ​>Products > Conveyor Equipment > Case Transfer Conveyor > Unicon V > Unicorn V. / VLJ

Unicorn VVLJ (Jump Unit)

Line Drive Conveyor

This unit allows you to change the position of the drive shaft along the line and change the speed (1:1.5).

Unicorn V / VLJ
About the various icons
Unicorn V / VLJ
Web Catalog

specification

* Colored text is semi-standard.

Model VLJ (Jump Unit)
RW nominal roller width (mm) 305 390 490 620 690 790 890 990
FW frame inner width (mm) 315 400 500 630 700 800 900 1,000
W frame outer width (mm) 375 460 560 690 760 860 960 1,060
Roller pitch (mm) 100, 75, 50 (Carrier roller is φ42.7) *1
L length (mm) 100P…900≦L≦3,000, 75P…750≦L≦3,000, 50P…800≦L≦3,000
Minimum machine height (mm) 300
Frame (mm) 130×30×11.5×t2.3
Carrier Roller φ48.6 Grooved
belt Urethane round belt
gear ratio 1：1　1：1.5
  1. The maximum nominal roller width when the roller pitch is 50P is 690RW.
  • We can also manufacture products other than the standard specifications, so please contact us for details.

Example of changing the drive shaft position

  • In curve units, the drive shaft under the carrier roller is attached to the inside of the curve, so a jump unit is required for S-shaped lines like the one shown above.

Dimensions

Note) The dimensions in < > are for a roller pitch of 75P.

none