Unicorn VVEMN
Round belt-driven DC Motor Roller Conveyor
Highly efficient transport with a simple structure of DC brushless motor roller and round belt linkage.
About the various icons
specification
| Model | VEMN (Round Belt-Linked DC Motor Roller Conveyor) | |||
|---|---|---|---|---|
| RW nominal roller width (mm) | 390 | 490 | 620 | 690 |
| FW frame inner width (mm) | 400 | 500 | 630 | 700 |
| W frame outer width (mm) | 460 | 560 | 690 | 760 |
| Roller pitch (mm) | 75、100 | |||
| Zone pitch [interlocking length] (mm) | 450、600、750、900 | |||
| L length (mm) | <Zone pitch: 450 Roller pitch: 75> 450≦L≦2,700 <Zone pitch: 600 Roller pitch: 75> 600≦L≦3,000 <Zone pitch: 600 Roller pitch: 100> 600≦L≦3,000 <Zone pitch: 750 Roller pitch: 75> 750≦L≦3,000 <Zone pitch: 900 Roller pitch: 75> 900≦L≦2,700 <Zone pitch: 900 Roller pitch: 100> 900≦L≦2,700 |
|||
| Minimum machine height (mm) | 190 | |||
| Frame (mm) |  130×30×11.5×t2.3 |
|||
| Carrier Roller | φ48.6 Grooved | |||
| belt | Urethane round belt | |||
| standard speed | Selectable speed between 4.8m/min and 48.5m/min (see speed chart) *32 speeds can be selected using the DIP switch on the control board of the conveyor drive unit. (Since a control board is installed in each zone, speed changes require settings for each zone.) |
|||
| Input Power | DC24V (DC brushless motor roller) | |||
| Base Input/Output | Input: Run-A, Run-B, Reverse Output: Error | |||
- ① Take sufficient care when using the conveyor as a work conveyor.
Safety measures are required in environments where parts of the body (hands, fingers, etc.) come close, so please contact our sales department.
②Stopping accuracy varies depending on the speed and conditions of the transported object. Please contact our sales department for details.
Dimensions
Estimated transport weight for each zone
speed table
Control board
